Sara's Quilt, Block 2

There hasn't been much progress on Sara's quilt this week, but I do have the pattern for Block 2 ready. It's the first in Sara's quilt that's made with applique on a pieced block.

This blog post explains details about how I did the applique, but I can't make PDF downloads of the templates available on my blog. I can only give a link to another site, so I'm publishing the instructions for cutting and assembling the block in a free pattern on Craftsy.

The templates can be used with fusible web, and that's the method I almost always use. I want this quilt to be special, though, with turned under edges. I love the look of hand applique, and with turned under edges, I can avoid the stiffness that can come with fusible web.

I'm not an expert at all when it comes to hand applique. I've experimented with lots of techniques, from needle turn applique to ironing heavily starched edges around templates. I'm pretty hopeless at turning edges as I sew or with an iron, so I used freezer paper, basting, and starch. Yes, it's much more time consuming than fusing, but this is a once only, very special quilt.

1. I traced the templates onto the dull side of freezer paper and cut them out on the lines.

2. I put the freezer paper shape shiny side down on the wrong side of the fabric and ironed it so it would stick.

3. When I cut the fabric I cut it about a quarter of an inch larger than the freezer paper template all around.

4. Now came the not so fun part - basting. Hand sewing is not my thing, but my O.C.D. has kicked in and I'm being fussy. Hand work is something I can do to keep my hands busy in the evening, and basting doesn't require much finesse. I have to admit that the basting  went very fast. I had all the pieces basted in less than an hour.

5. Normally a person would stitch this onto the quilt by hand and later snip the fabric behind the applique and pull out the freezer paper. This block was an experiment with trying to use machine stitching in such a way that it would imitate hand stitching, so stitching it down first wasn't going to work. I feared that some of the stitches would pierce the freezer paper and I'd have bits of paper stuck permanently in the quilt.

6. Starch next. I poured a little bit of liquid starch into a small plastic container. Then I used a small brush to saturate the turned edges of the fabric on the back of the freezer paper. I ironed it dry, and removed the basting stitches and the freezer paper. I was a little bit surprised that it held it's shape perfectly.

7. Next came glue. I put a few drop of quilt basting glue on the starched edges.

8. I placed the applique pieces onto the quilt block. Then I gave them time to dry.

I fussy cut the center part of the flower to get the large dot exactly in the middle.

9. Finally I sewed the appliques in place with a tiny machine blanket stitch. Matching thread for the faux applique was recommended in one of Pat Sloan's books, but even on the dark reds, the stitching didn't totally disappear into the background. That was a bit of a disappointment.

I think I'll go back to using the polyester microfiliment thread next time. It's practically invisible to start with. Then, again, I might just bite the bullet and applique my glued pieces down by hand.

I hope to make another pieced block this coming week. Fingers crossed!

We're experiencing a strange record breaking heatwave in Nebraska right now. I've never seen temperatures near 80 degrees in this part of the country in February! I may have to break down and do some yard cleanup.

Sara's Quilt: Block 1, Tutorial

Sara's quilt is a sampler with some pieced blocks and some applique blocks. This is the first pf the pieced blocks, so I'm calling it Block 1 for now. It looks a bit like four fish in a pond to me. Eventually, I may name it Fishpond. Or not.

I'm working with a layer cake and cream background yardage from "Miss Scarlet" by Moda. 

The block goes together so quickly. It's made entirely of squares and half square triangles (HST).

10" s 10"

I used six fabrics in this first block, but you could make the block with four. The cream fabrics in the blocks could all be made with the background fabric without changing the effect.

Cutting: 
From Red 1, cut two 3 1/8" squares
From Red 2, cut six 3 1/8" squares
From Red 3, cut four 2 1/2" squares and two 3 1/8" squares.
From Cream 1, cut four 2 1/2" squares and two 3 1/8" squares.
From Cream 2, cut four 3 1/8" squares.
From Cream 3, cut one 2 1/2" square.

Make the half square triangles.

You will need to make eight of A, four of B, and four of C, and one of Cream 3.

Red 2 and Cream 2 are used to make Unit A.

Red 2 and Red 3 are used in Unit B.

Red 1 and Cream 1 are used for Unit C

Cream 3 is used in the center of the block.

The squares for these are cut a bit larger than the exact measurement. I cut them down to 2 1/2" x  2 1/2" after they were sewn.

1. Choose the two 3 1/8" squares that are used for each unit. Place them right sides together in pairs.

2. Draw a diagonal line from corner to corner on the wrong side of one of the squares in each pair.

3. Stitch 1/4" from the drawn line on each side of the line.

4. Cut along the line. You will have two HST units. Press seams to the dark.

5. Square up and trim each HST to 2 1/2" x 2 1/2.

Assemble the block.

Diagram of the block assembly.

 1. Make four 4-patch units. Use one of each HST in each as shown below.

Make four.

2. Make two 2-patch units from 2 1/2" squares of Red 1 and Cream 1.

3. Sew one of the 4-patch units to either side of the 2-patch unit. Make two of these sets.

4. Sew the remaining 2 1/2" squares together in a row of five squares with the Cream 3 square in the center.

5. The sets from step 3 will go on the top and the bottom of the row of five squares. Sew together.

That's it. Easy-peasy. 

If you find a mistake in this tutorial, please let me know right away so that I can correct it. 

Quick Zippered Pouch - a Tutorial

Last year was the year of fleece robes for everyone. This year, Christmas sewing time was short. It's hard to find quick projects that are suitable for the four guys in my family, and since I needed a quick project, it became the year of the zippered pouch for everyone. I even have an extra for one myself.

My family loved the pouches,  but the "stuffing" I put inside of them turned out to be the most fun of the day. You can see what it was at the end of this tutorial.

Seven pouches in four easy days.

I thought the sewing might go quicker with instructions, so I researched a few tutorials searching for a good one. The first one I found was so hard to follow that I looked up another. And another. And another. I finally gave up and figured out my own method.  The pouch is fully lined, and after I'd made the first one, I found I could whip up one in the morning and another after lunch. I still had time left over for grocery shopping, cooking meals, frosting cookies, and catching up on my favorite Netflix show.

This is how I made them.

Fully Lined Zippered Pouch - 5" x 5 1/2" x 10 1/2"

Fabrics and Materials

•  2 fat quarters of coordinated fabrics for the outside of the pouch
• 1/2 yard of lining fabric
• 1/2 yard of fusible fleece (45" wide)
• One 18" or 20" zipper (If the zipper is too long it can easily be cut to size.)
• Thread

Cutting Instructions

 1. From one fat quarter, cut a rectangle 11" x 16". Cut a matching rectangle of fusible fleece and iron it onto the wrong side of the fabric. Cut a 2 1/2" square from each corner of the rectangle of fused fabric and fleece. This will be used to make the bottom half of the pouch.

2. From the second fat quarter, cut two rectangles 6" x 16". Cut matching rectangles of fusible fleece and iron them onto the wrong sides of each piece.  Cut 2 1/2" squares from two corners on the long side of each of the rectangles of fused fabric and fleece. These pieces will become the top half of the pouch.

3. Cut two rectangles, 2" x 5' each, from one of the main fabrics. These will be the handles on the ends of the pouch.

Sewing and Assembly

 Make the Handles

1. Fold one long edge of the fabric down 1/4" and press. (a)
2. Fold the bottom edge up about 1/2" and press. (b)
3. Fold the top over so that the total width of the strip is about 3/4". Press. (c)
4. Stitch close to the folded edge. (d)

Sew the Zipper in

1. Place the zipper with the right side facing the right side of one section of the pouch top along the long edge. Sew in place with a zipper foot.

2. Fold the sewn side back out of the way, and place the zipper face down on the right side of the second section of the pouch top. Make sure the two sections are evenly aligned. Sew in place with the zipper foot.

The two top sections with the zipper as seen from the right side and from the wrong side.

3. Place a section of the lining for the bag top on the wrong side of the zipper.The right side of the lining should be facing the right side of the main fabric. Align the pieces. Sew on the wrong side of the main fabric right on the same row of stitching that was made when attaching the zipper. Do not sew all the way to the ends of the lining fabric. Begin and end the stitching 1" from either end of the lining fabric.

4. Fold all of the sewn sections back out of the way and stitch the second section of lining to the other side of the zipper in the same way as the first.

5. Press the main fabric and the lining away from the zipper. The lining will be loose on each end.

6.Top stitch along both sides of the zipper. Sew from the right side of the bag. Start and stop the stitching 1" from either end of the zipper in order to keep those edges of the lining free.

Assemble the Pouch 
Use 1/4" seam allowances.

1. With right sides together, sew the top and bottom sections of the pouch together.

 2. Sew the top and bottom sections of the lining together. Leave an opening of at least 5" on one seam of the lining. This will provide a space to turn the bag right side out when it's finished.

 You will have two tubular shapes attached at the zipper.

3. Press the seams open.

Note: Make sure the zipper is partially open before proceeding to the next step! This will assure that you don't accidentally cut off the zipper pull if you have to trim the zipper back. You will also need the zipper partially open to turn the pouch right side out when the seams are all sewn.

4. Fold the handles in half lengthwise. Lay them facing inward right over the zipper on the right side of the main fabric. Sew one handle on each end of the zipper. The handles will be sandwiched between the top and bottom sections of the pouch.

5. With right sides together, sew the short sides of the pouch top to the short sides of the bottom section. If the zipper is longer than 18", trim off the excess length.

6. Pin the short sides of the top and bottom of the lining together. Fold the main fabric back out of the way at the zipper in order to reach the lining easily. Stitch the seams.

7.  Press the seams of the main fabric and of lining facing the bottom section of the pouch and away from the zipper.

8. Make the boxed corners. With right sides together, bring the seams on either side of the  2 1/2" squares that were cut out of the corners together.  Sew straight across. Stitch all four corners of the lining and all four corners of the main fabric of the pouch.

9. Pull the pouch through the opening in the lining seam to turn right side out.

10. Use a slip stitch to sew the lining closed. 

 11. Sew the lining to the ends of the zipper with a short slip stitch.

 12. Push out the corners and press the corner seams.

Done!!

And if you need to fill it quickly for wrapping ....

 Whatever works! 

 😉 

"Love, Charlie". How to Adapt a Child's Artwork for Applique Quilting

The Background Story
 
"Love, Charlie" is the first little quilt I've based on a piece of child's art. I had so much fun, and the resulting mug rug is one of my very, very favorites. I do hope it won't be the last piece to be inspired by a child.

 
Two years ago, Charlie made this painting in his art class. This lovely boy is the very talented son of one of my daughter's coworkers. I've sort adopted the family, and I designed the Tooth Fairy Pillow for Charlie when he lost his first tooth.

The Process

Step 1: Make a photocopy of the section of the artwork you want to use. Reduce or enlarge it to fit the size you need for your quilt.

The painting is greatly simplified, but it is definitely recognizable, and it retains much of the flavor of the original.

Step 2: Use a light table or a sunny window to trace a simple outline of the drawing onto paper. Working with fabric is quite a bit different than working with paints or a crayon.The artwork will more than likely need simplification and a bit of reshaping. The antlers were too skinny for fabric pieces, so I enlarged them and rounded them out. I eliminated some details.The black outline of the deer's head and the little white accents on the nose and ears were some of the details that I left out. The mouth ran into the chin, so I changed the shape just a bit.

Step 3: Back to the light table or the window. Flip the original drawing upside down and trace it onto a fresh sheet of paper. This will give you applique shapes that are already reversed and ready to use.

Step 4: Make dotted lines to show the overlap of the different pieces you'll need to cut for the appliques.

Step 5: Trace all the pieces you'll need onto a piece of paper or card stock and label them. You can trace them onto the paper side of your fusible web for quick fuse applique from here. This also works with freezer paper for turned applique.

Step 6: This step is optional. I always draw my pieces on card stock so that I can cut them out for tracing onto my fusible web. In this way, I know that I can make numerous identical copies of my pattern very quickly.

Finishing Touches

I embroidered the mouth, nose and eyes.

And finally, I embroidered a message to Santa. This wasn't part of the original painting at all, but when I looked at that little deer's face with those big eyes and that quirky smile, I knew this little guy wanted something.

What a blast! I do play and enjoy myself in my sewing room, but this was the most fun I've had in weeks. Charlie's deer was the lighthearted and very sweet pick-me-up that I've been needing.

I'd like to play around with other children's artwork to see how they might turn out. If you'd like to send me photos of your favorite child's drawing, I can see if anything else might adapt as nicely to applique as Charlie's deer did. No promises for using your photo, but I'll definitely respond to all emails.

Send photos to my email: klee2strings@gmail.com

Happy Last Weekend of October! 

October Halloween. https://www.craftsy.com/quilting/patterns/october-halloween-mug-rugs-pair/166809